Ghost 2 Immobiliser

Ghost is a wireless system that protects against key-cloning. It connects to the ECU unit via CAN data networks. It is also quiet, so it can't be detected.

It is only disarmed by entering a specific button sequence (like PIN code) that you've programmed with the buttons of your vehicle, such as those on the steering wheel or center console.

Protects Your Car from Theft

Car theft is on the rise, and cars are stolen in a matter of minutes. It is essential that car owners think about the additional security measures they can adopt. Using an immobiliser is one of the best and most established ways to protect your vehicle. Ghost immobilisers are an excellent choice since they are small and hidden within the vehicle's wires. They also don't emit radio frequency signals. They are therefore untraceable and can be fitted without affecting the CAN bus system in your vehicle.

Unlike other immobilisers that rely on keypad inputs, tags or the exact sequence of buttons to disable them, our ghost immobiliser near me is only disabled by the pin code that was created by us at the time of installation. This unique sequence of disarming uses the buttons already present within your vehicle, such as the ones on the steering wheel, doors, or the centre console to stop anyone from starting their engine and driving away your vehicle. This makes it impossible for thieves to duplicate your key or use jamming/spoofing devices which could disable standard immobilisers.

A ghost immobiliser prevent your car from being driven however it also prevents the car from being smashed for parts. This is a growing problem in the UK due to the increasing popularity of these cars. It can happen within one minute. TTW ghost immobilisers are easily programmed to guard vehicles from such attacks.

If you have our ghost 2 immobiliser near me installed, it will stop your vehicle from being stolen at an auto repair shop or when it is being driven by an employee while your vehicle is on the lift at the garage. The Ghost can be set to Service/Valet Mode, which will only allow you, the consumer to use a specific button combination.

Contact us today if you want to know more about our Ghost immobilisers or if you would like a no-cost quote. We are happy to assist you and provide peace of mind knowing that your vehicle will be safe for all times.

No LED or key fobs to indicate its place of residence.

This non-detectable car immobiliser integrates with your cars CAN network to guard your vehicle from the newest kind of car theft. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators, instead it makes use of buttons found in the standard factory controls in your vehicle, such as the ones on the steering wheel, door panels and the centre console. This creates a code that has to be entered to begin the operation of your vehicle, making it difficult for thieves to track.

The CAN-BUS device makers have also included additional security measures to guard against the device being hacked or by-passed. It also has CANBUS blocking and physical immobiliser cuts, which means that even the keys are stolen and the burglar will not be able to escape with your pride and Joy.

It's easy to have the CAN-BUS immobiliser installed in your vehicle and it only takes about 30 minutes. We will have someone from our team in your area to schedule a time and location that works for your needs. Once your vehicle is fitted, you will be given a registration number and unique security codes for your mobile and the app will make it easy to use and ensure that you are always in charge of your car's security.

The system is compatible with a wide range of modern vehicles, but if you own a vintage or specialist car we recommend you contact us to confirm compatibility. The price for installation and supply of the Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our certified fitters. Do not hesitate to reach out to our helpful team with any queries. We're looking forward to hearing from you.

Easy To Setup And Programming

Immobilisers are a feature of numerous modern vehicles to stop theft or hot-wiring. Immobilisers are more effective than physical deterrents such as steering wheel locks and wheel clamps due to the fact that they are integrated into the vehicle.

The system connects directly to the CAN data network of your vehicle. It will stop it from starting until you enter the unique code. The unit is sealed, and so small that it can be installed almost anywhere in your car with no requirement for additional wiring. It also doesn't emit radio frequency signals, so it cannot be detected by RF scanning or code grabbing equipment that is used by thieves.

Ghost utilizes your vehicle's current buttons on the steering wheel as well as the door panels and central console to create a customisable disarm sequence (like the PIN code) that needs to be entered to authorize the start-up of your car. The pin code sequence is dependent on 4 to 21 button presses and can be easily changed when required. You can also put the vehicle in Service/Valet Mode to ensure that it is still operable but will not start or drive. This will keep your car safe when you bring it in for servicing or valet parking, and make sure that the mechanic isn't able to access your pin code to deactivate your system.

If you will be away from your vehicle for a long period of time like a vacation or business trip or on a business trip, you can use our app to obtain temporary pin. You can also enter your pin number manually when you are planning to drive the vehicle.

Our CAN bus immobiliser may be linked to remote key fobs and tracker (Brand dependent) that will have priority over the ghost system. This will provide extra security in the event of your vehicle being stolen or your keys are lost.

Contact us today to learn what we can do to protect your vehicle from key-cloning or hacking. We offer our services throughout the UK as well as in our specially-designed installation center in Derby.

Service/Valet mode

Modern cars are equipped with sophisticated eco systems that have stop/start functions that require the correct inputs to function properly. For example, battery voltage and temperatures of the engine, as well as external temperatures and which electrical systems are active. These can lead to issues, and it can be difficult to determine if the issue is Ghost-related or not. This is especially the case if your car has been recently cleaned or valet-parked. You can utilize the ghost service mode that allows the vehicle to begin and drive temporarily without the need for a pin. This can be helpful when your vehicle is being serviced or valet at an independent garage.

Press the button for service five times to enter service mode. The indicator signal will flash twice when the service mode is selected. You can exit the mode at any time using the PIN code. Once you have exited service mode the Ghost immobiliser will resume normal operation.

This is a discreet system that communicates with the vehicles ECU using the CAN data circuit, and connecting directly to the original vehicle buttons, and not using radio frequency signals as other immobilisers. This makes it nearly impossible for any other device to hack or bypass - even jamming devices that spoof codes from an original key fob have no impact on the system.

It is a TASSA-verified anti-theft device that complies with the highest protection standards. This includes the only vehicle marking system that is linked to the international security register which is an insurance company requirement.

The ghost immobiliser is very compact form factor and Thekeylab is easily hidden in your vehicles factory wiring which makes it nearly impossible for thieves to track. The sealed unit is so small that it can be mounted in a variety of places around the car, including under dashboards or on the steering wheels.

The system uses existing buttons on your vehicle, such as those on the steering wheel, door panels, or on the centre console to allow you to create a an unique and dynamic sequence of disarming that can be as long as 20 presses that must be entered in order to start your vehicle. It can be entered by anyone with your unique pin code - it is safe and secure for you and your family, colleagues or friends to use.