Fiat 500 Key Fob Replacement

If your 500 key fob stops working Try a different one to see if the car can detect it. If it does, then it could be a problem due to the battery or water damage on the fob that was originally used.

First replace the battery. Make sure the new coin cell battery is inserted correctly, with the "+" side facing down inside the fob.

Dead Battery

Most of the time when a fob doesn't work, it's because the battery is dying. It's simple to fix it and most fobs will warn you when the battery is running low. There are instructions on YouTube for almost every key fob on your vehicle or in the owner's manual. You can also replace it by taking it to the locksmith or dealer who has sold it to you.

Sometimes a fob will stop working due to a problem on the internal circuit board. It's rare, but it does occur. If you dropped the fob on a hard object, it could cause damage to the internal chip. It can also happen if you use an aftermarket key, and the fob doesn't work. In this situation, it is necessary to visit a dealer or locksmith to have the key reprogrammed to work with your 500.

One 2012 FIAT 500 Flip Key Remote - Look-alike Ilco brand with lock, unlock and trunk buttons. New replacement keyless entry remote (will need to be cut and programmed by locksmith)

Chip Damaged

Fiat 500 key fobs are wireless devices that send signals to the car every time you press the button. It is equipped with a microchip that has information about the code that will allow it to communicate with the car. If the chip is damaged, it will not send the correct code, and the car will not start. A locksmith can repair the damage. United Locksmith can complete this service on both classic and newer models, so don't hesitate to contact us.

A locksmith can program a new key fob. It's less expensive to do this rather than going to the dealer, and it performs the same. A locksmith will need some specific information from you, including the year in which your vehicle was manufactured and the name of its model.

If you are not sure how to fix this issue try scratching the chip with the help of a US dollar bill. The copper on the bill is abrasive enough to take away oxidation and dirt but won't cause any harm to the microchip. If the chip is physically damaged, however, it may not be repairable. This could happen if you drop it or Fiat 500 Key Fob Replacement get it pushed over by your vehicle.

Water Damage

Whether you accidentally dropped your keys in the pool, put them in your bag while swimming at the beach, or Fiat 500 key Fob Replacement splashed them with water on a wet day you can be sure that your fob will have some water damage. Even if you only have the smallest amount of water on the key, it could cause major problems for its electronic components.

It is usually possible to solve this problem by taking the fob off and cleaning it with a paper towel. Once the fob is dry and is dry, you can replace its battery. It should then start working again.

You can also take the fob to a local locksmith or auto shop to get it professionally cleaned and programmed. These professionals can use special equipment to ensure that the key fob works with your car's computer.

When your Fiat 500's key fob stops working, it can be frustrating and stressful. It's expensive and inconvenient to take your key fob to a dealer. Locksmiths can replace your key fob with no need to visit a dealership. Locksmiths are better than a dealer since they can handle all aspects of your car's key fob replacement without the requirement for a dealership visit.

Pairing Issues

If you lose your key fob or it ceases to function and there is nothing problem there could be a chip that has gone awry. It could be due to water damage or a dead battery.

This is often done by following the directions in the owner's manual. If you're having problems or your manual isn't working it is recommended that you have an automotive locksmith perform this task. This will ensure that the chip is not damaged, and is the most economical option.

Another issue facing 500 owners is that the key fob won't secure the car. This can be a problem when you need to refill at gas stations. Some owners have reported the locking mechanism of their 500's malfunctioning and they had to replace the entire intermediate shaft for steering. Fiat has actually mentioned this problem in a technical bulletin (TSB).

If you're having issues with your Fiat, an experienced locksmith can assist. They will duplicate your current key or create a brand new one that is able to lock and start the vehicle. They're able to do this without seeing your old key and are generally more affordable than purchasing it from a dealership.